I deleted all spaces in the USB paths, and still got the same results. Then to eliminate the USB stick factor, I copied the install folder to C and placed the batch on the desktop - no spaces involved anywhere. I rewrote the command line in the batch to point to the new install directory. Still the same results: invalid switch.
Then in each location I tried the setup file directly, with the /S switch, and in both cases it did fire the prog, but interactively.
How to perform a silent/custom installation of theWord
Re: How to perform a silent/custom installation of theWord
So are you talking of the main installer? or just a module installer?paul1149 wrote:I deleted all spaces in the USB paths, and still got the same results. Then to eliminate the USB stick factor, I copied the install folder to C and placed the batch on the desktop - no spaces involved anywhere. I rewrote the command line in the batch to point to the new install directory. Still the same results: invalid switch.
Then in each location I tried the setup file directly, with the /S switch, and in both cases it did fire the prog, but interactively.
Jon
theWord 6 Bible Software
OS for testing; Windows 10
Beta Download ------Beta Setup Guide------On-line Manual------Tech doc's and Utilities------Copyright Factsheet
theWord 6 Bible Software
OS for testing; Windows 10
Beta Download ------Beta Setup Guide------On-line Manual------Tech doc's and Utilities------Copyright Factsheet
Re: How to perform a silent/custom installation of theWord
In all cases I've been addressing the main installer. If it goes right the modules should follow - except for that weirdness of the modules being installed under the program files hierarchy at one point.
Re: How to perform a silent/custom installation of theWord
The main installer does not support the /S
Jon
theWord 6 Bible Software
OS for testing; Windows 10
Beta Download ------Beta Setup Guide------On-line Manual------Tech doc's and Utilities------Copyright Factsheet
theWord 6 Bible Software
OS for testing; Windows 10
Beta Download ------Beta Setup Guide------On-line Manual------Tech doc's and Utilities------Copyright Factsheet
Re: How to perform a silent/custom installation of theWord
JG - I had read the thread you cited before I posted on this issue, but I naturally assumed that Costas' statements here superseded that thread.
Re: How to perform a silent/custom installation of theWord
There has been a confusion for which I am responsible:
the main installer that you download from the site is called: theword-setup-en.exe and is 50MB and is actually the package that contains everything in it. This one does not support a silent installation of course.
But I am NOT referring to this one!
The file i am referring to is called theword-setup.exe and is 188KB. This file is extracted when you run the main installer and THIS is the one that you should be using and supports the silent installation.
This is the one I patched. But the link i gave you above does not really work and instead it downloads again the big (full 50MB) package... sorry for that.
To get the small installer use this link: http://www.theword.net/files/setup/theword-setup.ex_ and rename to .exe.
(or download the big package again and do what I describe in the first post)
Costas
the main installer that you download from the site is called: theword-setup-en.exe and is 50MB and is actually the package that contains everything in it. This one does not support a silent installation of course.
But I am NOT referring to this one!
The file i am referring to is called theword-setup.exe and is 188KB. This file is extracted when you run the main installer and THIS is the one that you should be using and supports the silent installation.
This is the one I patched. But the link i gave you above does not really work and instead it downloads again the big (full 50MB) package... sorry for that.
To get the small installer use this link: http://www.theword.net/files/setup/theword-setup.ex_ and rename to .exe.
(or download the big package again and do what I describe in the first post)
Costas
Re: How to perform a silent/custom installation of theWord
Costas, I fall somewhere in the middle on that. I did the unwrapping of the installer package as you had originally suggested. And I am dealing with "theword-setup.exe", not "theword-setup-en.exe". But it is some 50 MB, not 188KB. There is nothing in that unwrapped package near 188KB, save some modules. That small installer is not in the big package, and this seems to be the root of the problem.
Re: How to perform a silent/custom installation of theWord
Got it working now from desktop on a VM XP notice the quotes just around the "Documents and Settings"
start /wait C:\"Documents and Settings"\Jon\Desktop\theword-setup.exe /S
did get this error at the end.
start /wait C:\"Documents and Settings"\Jon\Desktop\theword-setup.exe /S
did get this error at the end.
Jon
theWord 6 Bible Software
OS for testing; Windows 10
Beta Download ------Beta Setup Guide------On-line Manual------Tech doc's and Utilities------Copyright Factsheet
theWord 6 Bible Software
OS for testing; Windows 10
Beta Download ------Beta Setup Guide------On-line Manual------Tech doc's and Utilities------Copyright Factsheet
Re: How to perform a silent/custom installation of theWord
I cannot repeat that. Do you consistently get this?
Costas
Costas
Re: How to perform a silent/custom installation of theWord
Yes, but only on XP VM, not able to try on normal XP install.csterg wrote:I cannot repeat that. Do you consistently get this?
Costas
Windows 7 did not have an issue.
Jon
theWord 6 Bible Software
OS for testing; Windows 10
Beta Download ------Beta Setup Guide------On-line Manual------Tech doc's and Utilities------Copyright Factsheet
theWord 6 Bible Software
OS for testing; Windows 10
Beta Download ------Beta Setup Guide------On-line Manual------Tech doc's and Utilities------Copyright Factsheet
Re: How to perform a silent/custom installation of theWord
Ok, I finally got it sorted. There were two problems.
First, I must have moved the main installer into the folder where the installation components are. When I ran through the unpacking process in post #1, I got the 188KB executable again.
Second, I re-discovered that the Start command must contain the Title spec if the file path contains quotes. I knew that, but forgot, and removed them for conciseness. I then was finding that adding quotes to the file path of the executable was messing things up badly. So the correct form is
Start /Wait "" "my file path....exe" /S
This is working great. Now I have to edit all my batches to get them correct.
Thanks.
First, I must have moved the main installer into the folder where the installation components are. When I ran through the unpacking process in post #1, I got the 188KB executable again.
Second, I re-discovered that the Start command must contain the Title spec if the file path contains quotes. I knew that, but forgot, and removed them for conciseness. I then was finding that adding quotes to the file path of the executable was messing things up badly. So the correct form is
Start /Wait "" "my file path....exe" /S
This is working great. Now I have to edit all my batches to get them correct.
Thanks.
Re: How to perform a silent/custom installation of theWord
This is great Paul. At least I know at least 1 person is using this
Re: How to perform a silent/custom installation of theWord
Ok, I just gave it its maiden run. It seemed to work fine, but then on its first opening it said no Bibles were installed. I thought maybe because I wasn't CDing into the install directory before running the install file, so I ran it again from that folder. I had the books, backgrounds, cache, etc, but no Bibles. Strange.
So I ran the interactive installed and got everything. But when I opened Word all it showed was the Bible tree. No Bible or other windows were open at all, which was a bit disconcerting. They opened fine manually, but I'd like to have the simple View presented to a new user.
So there are still a couple of fine points that need clearing up.
Thanks.
So I ran the interactive installed and got everything. But when I opened Word all it showed was the Bible tree. No Bible or other windows were open at all, which was a bit disconcerting. They opened fine manually, but I'd like to have the simple View presented to a new user.
So there are still a couple of fine points that need clearing up.
Thanks.
Re: How to perform a silent/custom installation of theWord
Don't worry, these are easy.
A silent install makes a normal install, correct? Did you make sure the proper folders are all there?
Does the folder c:\ProgramData\TheWord exist?
Costas
A silent install makes a normal install, correct? Did you make sure the proper folders are all there?
Does the folder c:\ProgramData\TheWord exist?
Costas